Sabalpack Jaguar Plus, Vertical Packaging Machine Used and Reconditioned. High quality vertical packaging machine designed to pack loose products with a maximum weight of 5Kg.

Welding on the bottom of the product

This type of flow pack packaging machine carries out a sealing at the top and at the end of the package thanks to the transversal sealer and a longitudinal seal under the product along the entire length. The result obtained is the typical flow pack that we are used to seeing in brioches.

Fixed tunnel

The fixed tunnel is particularly suitable for products with not too regular shapes such as products placed on cardboard or napkins.
The quality of the packaging is higher than the variable tunnel but it is limiting in the variety of products that can be packaged, this is because for each product a tailor-made tunnel will have to be built with a relative increase in the costs of the packaging machine.

Scissor and translating sealer

The other large family of sealers is that of scissor sealers, some also called translating, which perform a hermetic seal and are therefore designed for packages that require Modified Atmosphere (MAP).
In this case, the two jaws close and couple with each other moving vertically, exactly as happens in a press or vice. This movement allows to define a constant welding pressure for as long as necessary.
This type of sealer does not allow high packaging speeds, generally they never exceed 40 pieces per minute (ppm) unless the sealing bar is equipped with a translating movement (box motion) which allows to speed up the waiting time for arrival. of the products by physically moving the entire sealing unit towards the product and back. In this case, the packaging speeds are able to rise up to about 60 ppm, bringing the translating flow pack to a speed similar to that of a rotary press.

Notch pitch photocell for printed film

A device for reading the printed film notch pitch that allows you to read the position of the notch and to correct the phasing of the envelope so that the sealing always takes place between one notch and another. This method is essential if the package we have to make is printed with a graphic that must always be shown in full.

Electronic marker

This is the evolution of the rotary marker. Depending on the model and age, it is able to print a series of user-defined information using the appropriate software. The most recent models are also able to print the barcode and use different colors.